ECB-1221R Wireless Long Range Multi-function Client Bridge
Since the log i s not d ynamic, y ou must c lick o n the Refresh butt on for the most
recent events, or click on the Clear button to clear the log.
Upgrade Firmware
Click on the Upgrade Firmware li nk un der th e Management m enu. Th is p age is
used to up grade the f irmware o n the d evice. Make sure tha t d ownloaded the
appropriate firmware from your vendor.
Click on the Browse button and then select the appropriate firmware and then clic k
on the Upload button.
Note: The upgrade process may take about 1 minute to complete. Do n ot power off
the device during this process as it may crash the devic e and make it unusable. The
device will restart automatically once the upgrade is complete.
Save / Reload Settings, Reset to Default
Click on the Save / Reload Setting link under the Management menu. This option is
used to save t he c urrent s ettings of the d evice in a f ile on your local dis k o r load
settings on t o the dev ice f rom a local
administrators who have sever al devi ces that need to be configu red with the sam e
settings.
This page also allows you to reset the device to its factory default settings.
disk. This
feature is very handy for
52