Understanding The Hardware; Hardware Installation; Ip Address Configuration - EnGenius ECB-1221R User Manual

Wireless long range multi-function client bridge

Hide thumbs Also See for ECB-1221R:

Table of Contents

ECB-1221R Wireless Long Range Multi-function Client Bridge

2 Understanding the Hardware

Place the unit in an appropriate place after conducting a site survey.

Plug one end of the Ethernet cable into the RJ-45 port of the device and another

end into your PC/Notebook.

Insert the D C-inlet o f the pow er ad apter in to the port labeled "DC -IN" and the

other end into the power socket on the wall.

This diagram depicts the hardware configuration

This dev ice c an be con figured as a Client Bridge or Access Poin t. The de fault IP

address of the device is 192.168.1.1 or 192.168.1.2. In order to log into this dev ice,

you must first configure the TCP/IP settings of your PC/Notebook.

1. In the control panel, double click Network Connections and then double click on

the connection of your Net work Int erface C ard (NIC). You will then

following screen.

Ethernet

Bridge/AP

Power Outlet

AC/DC cable

see the

Table of Contents