Honeywell SPZ-8000 Maintenance Manual page 675

4. D. (5) (a) Climb Phase
Climb speeds can be altered on the following CD-81O CDU pages:
Initialization climb speed -
PERF INIT 2/5
or
CLIMB PAGE
. Constraint speed - FLIGHTPLAN X/X
. Restriction speed - PERF INIT 4/5
Climb speed
rules:
. Rule 1 - Speed constraints > initialization climb speeds are
ignored.
Rule 2 - Speed constraints < initialization climb speeds are
honored until the constraint waypoint is sequenced. Once
the constraint waypoint is sequenced the target speed
returns to the initialization climb speed.
. Rule3
- Initialization climb speeds can be changed at any
time and will cause the active target speed to change if no
speed constraint is active.
Figure 272 shows the climb phase of the flight.
The following
paragraphs refer to the circled numbers shown.
22-14-00
Page 298.217
Aug 15/91
Use
or
disclosure of information on this page is subject to the restrictions on the title page of this document.