Table of Contents
Advertisement
NOTE :
The following RF connector kits contain two RF connectors and two
retainer rings.
The retainer rings can be ordered separately under
Part No. 0493-18.
IK-858RF Part No. 7500436-90X
RF Connector Kit for use with Mounting Tray.
Two kits required for
each
MLS
Receiver
installation.
Select
from the following:
Part No. 7500436-907 - Connector Kit with RF Straight Connector
(RG-214)
Part No. 7500436-908 - Connector Kit with RF Right Angle Connector
(RG-214)
Part No. 7500436-909 - Connector Kit with RF TNC Adapter Connector
ML-850 MLS Receiver
Leading Particulars
Table 14-1 (cent)
The ML-850 MLS Receiver decodes and
processes
data
from
an
MLS
ground
station
and provides
an accurate
indication
in both
azimuth
(equivalent
to
localizer)
and elevation
(equivalent
to glide
slope)
of the deviation
from
the desired
flight
path.
The deviation
data
is displayed
on the PFD and is
output
to the FZ-820
Flight
Guidance
Computer
for use in the approach
mode
of operation.
The ML-850 operates in the frequency range of 5031.0 to 5090.7
MHz on 200
channels
spaced
3000
kHz apart.
Selection
of the desired
azimuth
and
elevation
angle
and tuning
is accomplished
with
the CM-850
MLS Con-
trol/Display
Unit.
The ML-850 provides ARINC 429 digital outputs (Table 14-2) that conform to
the data standards of ARINC characteristic 727
for
MLS receivers.
22-14-00
Page 198.193
Apr 15/93
Use or disclosure of information
on this page is subject to the restrictions
on the title page of this document.
- Quick Links:
- Spz-8000 System Flow Diagram
Hide quick links:
Advertisement
Table of Contents
