Honeywell SPZ-8000 Maintenance Manual page 39

INTRODUCTION
I
I
This manual provides general system maintenance instructions and theory of
operation for the SPZ-8000 Digital Automatic Flight Control System for Gulfstream
IV aircraft.
This manual provides block diagram information and interconnect diagrams to
permit a general understanding of System interface.
Common system maintenance procedures are not presented in this manual. The best
established shop and flight line practices should be used.
Refer to the Handling, Storage, and Shipping Procedures for Honeywell Avionics
Equipment Instruction Manual, Honeywell Pub. No. 09-1100-01, for information on
shipping and storage of the System components.
Additional information on subsystems installed in the Gulfstream IV is available
in the following publications:
Table A is a loaic truth table for use as an aid in understanding the loqic
functions on th; block diagrams in Sections 2 and 3.
Title
SPZ-8000 DAFCS (Phase II) Pilot's Manual for the
Gulfstream IV
LASEREF@ II Installation Manual
LASERTRAKW II NDU Installation Manual
LASEREF@ II Pilot's Manual
LASERTRAKW NDU Pilot's Manual
LASERTRAK'"II NDU (with GPS readout) Pilot's Manual
LASEREF@ II GPIRS Pilot's Manual
GPIRS Installation Manual
Global Positioning System Sensor Unit (GPSSU)
Installation Manual
Air Data ComDuter and Servoed Altimeter System
Test and Inspection Technical
AA-300 Radio Altimeter Operat-
FMZ-600/800 Fliqht Manacjement
and Maintenance-Manual
Use or disclosure of information
Newsletter "
on and Installation Manual
System (FMS) Installation
Publication No.
28-1146-64-00
95-8352
95-8308
95-8351
95-8440
95-8711
28-3341-001
15-3341-006
95-8698
23-1980-04
15-3321-06
A15-1147-15
22-14-00
Page INTRO-1
Apr 15/93
on this page issubject to the restrictions on the title page of this document.