Connecting Cables; Connecting Lan Cable - Kyocera ECOSYS M6026cidn Operation Manual

Hide thumbs Also See for ECOSYS M6026cidn:

Table of Contents

Preparation before Use > Connecting Cables

Connecting Cables

The equipment can be connected with a network cable and used as a network printer or network scanner.

Check that the indicators are off.

Connect the machine.

Connect the LAN cable to the network interface located on right side of the body.

Connect the other end of the cable to the hub.

Set up the machine.

Configure the network settings.

For details, refer to Machine Setup Wizard on page 2-29.

Ecosys m6526cidn