Kyocera ECOSYS M6026cidn Operation Manual page 353

Troubleshooting > Responding to Error Messages
M
Error Message
Machine failure.
Maximum number of scanned
pages.
Memory is full.*
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
P
Error Message
Paper jam.
Print overrun.
Checkpoints
—
Is the acceptable scanning count
exceeded?
—
—
Checkpoints
—
—
10-16
Corrective Actions
Internal error has occurred. Make a note
of the error code displayed on the touch
panel, and contact your Service
Representative.
Only one copy of the scanned pages is
available.
Press [Continue] to print, send or store
the scanned pages.
Press [Cancel] to cancel printing,
sending or storing.
Unable to continue the job as the
memory is used up.
Press [Continue] to print the scanned
pages. The print job cannot be
processed completely.
Press [Cancel] to cancel the job.
The process cannot be performed due
to insufficient memory. If only [End] is
available, press [End]. The job will be
canceled.
Corrective Actions
If a paper jam occurs, the machine will
stop and the location of the jam will be
indicated on the touch panel. Leave the
machine on and follow the instruction to
remove the jammed paper.
Warning. Low printer memory. The job
was paused. Re-starting the job. Press
[Continue].
Reference
Page
—
—
—
—
Reference
Page
10-22
—