Sending Functions - Kyocera ECOSYS M6026cidn Operation Manual

Sending > Sending Functions

Sending Functions

Send screen shows the commonly used functions. By pressing [Functions], other selectable functions will be shown as
a list. Use [ ] or [ ] to select the function.
Select the file format for images being sent.
Specify the original size.
Specify the original orientation to scan in the correct direction.
Automatically scan 2-sided originals.
Change the size of the image being sent.
Send each page in a separate file.
Set the resolution at which to scan originals.
Adjust the density.
Change the color mode for images being sent.
Select original image type for best results.
Emphasize the outline of texts or lines.
Blur the image outline.
Darken or lighten the background (i.e., the area with no text or images) of originals.
Enlarge or shrink originals according to the sending size.
Scan a large number of originals separately and then produce as one job.
Add a file name to the job to easily check its status.
Add an E-mail subject and body (when sending E-mail).
Send notice by e-mail when a job is complete.
Encrypt your message.
Send a image to a WSD-compatible computer.
NOTE
This section does not include fax settings. For details on fax operation, refer to the FAX Operation Guide. Fax
functionality can only be used on products equipped with fax capability.
What do you want to do?
6-36
Reference Page
File Format  page 3-50
Original Size  page 3-35

Original Orientation page 3-36

Duplex page 3-37
Sending Size  page 6-37
File Separation  page 6-39

Scan Resolution page 3-44
Density  page 3-43
Color Selection  page 3-53
Original Image  page 3-45

Sharpness page 3-47
Background Density Adjust
page 3-48

Zoom page 3-49
Continuous Scan  page 3-39
File Name Entry  page 3-56

E-mail Subject/Body page 6-40
Job Finish Notice  page 3-54
FTP Encrypted TX  page 6-41
WSD Scan  page 6-42
