Kyocera ECOSYS M6026cidn Operation Manual page 183

Sending > Specifying Destination
5
For send to folder (SMB)
Item
Host Name
Path
Port
Login User Name
Login Password
For send to folder (FTP)
Item
Host Name
Path
Login User Name
Login Password
Refer to Character Entry Method on page 11-8 for details on entering characters.
Confirm the information.
Check the information. Change the information as needed by pressing the item in question.
Ready to send.
Folder - Confirmation
Host Name abc
Path abc
Port 139
Login User Name abc
Menu Cancel < Back
When specifying a computer or server port number as the destination, press [Port] and enter
the port number. You can enter a number from 1 to 65,535 with a maximum of 5 digits.
Data to be entered
Host name or IP address of the PC to receive
the data.
Share name
For example: scannerdata
If saving in a folder in the shared folder:
"share name\folder name in shared folder"
Normally 139.
In Windows Vista/7, if 139 is not used, set to
445.
User name to access the PC
Domain name\User name
For example, abcdnet\james.smith.
User name@Domain name
For example, james.smith@abcdnet
Password to access the PC
Data to be entered
Host name or IP address of FTP server
Path for the file to be stored
For example, "User\ScanData".
If no path is entered, the file is stored in the
home directory.
FTP server login user name
FTP server login password
10:10
Use [ ] or [
1/2
OK
6-20
Max. characters
Up to 64 characters
Up to 128 characters
1 - 65535
Up to 64 characters
Up to 64 characters
Max. characters
Up to 64 characters
Up to 128 characters
Up to 64 characters
Up to 64 characters
] to scroll up and down.