Customize The Web Interface - KVH Industries TracPhone V11 Installation Manual

15

Customize the Web Interface

Follow these steps to customize the web interface
for the customer's use.
Set the Administrator Password
The user must be logged in as an administrator to
make changes to the system's configuration.
Follow these steps to change the administrator
password to something unique.
a. At the TracPhone V11 web interface, click the
Settings tab. Then click Account.
b. In Security, click Edit.
c. For the current password, enter the default
password: "password" (see Figure 52).
NOTE: The password must be between 4 and 20
characters in length, with at least one letter and one
number, case-sensitive.
d. Enter and then re-enter the new password.
Then click Save Settings.
Enter the Vessel Name
The vessel name is displayed on the home page
and in all support communications. Follow these
steps to enter the correct vessel name.
a. At the TracPhone V11 web interface, click the
Settings tab. Then click Account.
b. In Vessel Name, click Edit.
c. Enter the vessel name (see Figure 53). Then
click Save Settings.
Assign Phone Line Names
The phone line names are displayed on the home
page and in all support communications. Follow
these steps to assign a name (i.e., location) to each
phone line.
a. At the TracPhone V11 web interface, click the
Settings tab. Then click Other.
b. In Phone Line Names, click Edit.
c. Enter names for Lines 1 and 2 (see Figure 54).
Then click Save.
28
Figure 52: Setting the Administrator Password
Figure 53: Entering the Vessel Name
Figure 54: Assigning Phone Line Names