14
Customize the Web Interface
Follow these steps to customize the web interface
for the customer's use.
Set the Administrator Password
The user must be logged in as an administrator to
make changes to the system's configuration.
Follow these steps to change the administrator
password to something unique.
a. At the TracPhone V3-HTS web interface, click
the Settings tab. Then click Account.
b. In Security, click Edit.
c. For the current password, enter the default
password: "password" (see Figure 37).
d. Enter and then re-enter the new password.
Then click Save Settings.
Enter the Vessel Name
The vessel name is displayed on the home page
and in all support communications. Follow these
steps to enter the correct vessel name.
a. At the TracPhone V3-HTS web interface, click
the Settings tab. Then click Account.
b. In Vessel Name, click Edit.
c. Enter the vessel name (see Figure 38). Then
click Save Settings.
Assign Phone Line Name(s)
The phone line names are displayed on the home
page and in all support communications. Follow
these steps to assign a name (i.e., location) to Line
1. You also might want to enter "Not Used" for
Line 2, since the system is limited to a single
phone line.
a. At the TracPhone V3-HTS web interface, click
the Settings tab. Then click Other.
b. In Phone Line Names, click Edit.
c. Enter names for Lines 1 and 2, as needed (see
Figure 39). Then click Save.
22
Figure 37: Setting the Administrator Password
Figure 38: Entering the Vessel Name
Figure 39: Assigning Phone Line Names