Table of Contents
Advertisement
6.1 INPUT CONFIGURATION (FOR OPTIONS 1 AND 2)
The following table shows the list of elements that can be assigned to each input. The table is divided into groups
Table 6–1: INPUT ELEMENTS
INHIBITIONS BY DIGITAL
INPUT
MISCELLANEOUS 2
INPUTS
6
6-4
NO DEFINITION
50P1 disabled
50G1 disabled
51P disabled
51G disabled
50P2 disabled
50G2 disabled
49 disabled
Trip disabled
AR External Initiation Input
AR External Block Input
52 A status
52 B status
Trip contact close (PULSE)
Group change
Settings change disabled
Reset
(PULSE)
Oscillo trigger
(PULSE)
General input
MIFII Digital Feeder Relay
INPUT NOT ASSIGNED
50P1 trip disabled
50G1 trip disabled
51P trip disabled
51G trip disabled
50P2 trip disabled
50G2 trip disabled
49 trip disabled
Trip of all elements disabled
AR External Initiation Input
AR External Block Input
Breaker closed indication
Breaker open indication
This element allows activating the trip output
This setting has to be enabled for setting group 2. If
disabled, the active setting group is the one defined in
ADVANCED GENERAL SETTINGS
Enabled means that settings and active group cannot be
changed.
It is only possible to switch to Group 2 through digital input
Group change
This element resets latched LEDs and outputs
Triggers oscillography element
Generic element that may be used in logic configuration.
6 I/0 CONFIGURATION
6.1.2 INPUT ELEMENTS
GEK-106237P
Advertisement
Table of Contents
