Intelli-Sound Usb & Nand Operation - Sundance Spas Cameo Owner's Manual

AS/PS button (6) for 2 or more seconds to enter folder
searching mode. Then press VOL up/down button (3) to search
through available folders. At desired folder, press ENT button
(9) to confirm selection. Once a folder is selected, it will
automatically begin to play the first track in the selected folder.
22.5 Intelli-Sound USB & NAND Operation
1. Play USB or NAND (internal memory)
Open the front panel and plug a USB device into the USB Docking
Station (10). The USB device will begin to play automatically. Close
the front panel. The "USB" symbol on the display indicates that a
USB device is connected.
• To Play connected USB device: Press MODE button (4) to
change to USB mode. The USB will play. The display (17)
shows the current track, play time, and USB symbol. If no USB
device is connected, simply plug a USB device into the
USB docking station (10) and the unit will automatically switch to
USB mode.
• To Play NAND: Press MODE button (4) to change to NAND
mode. The NAND will play. The display shows the current track
and play time. The Play/Pause, Repeat, and Random function
for USB and NAND are the same as CD Player Operation (page
63-64).
2. Copying Music Files from USB to NAND (internal memory)
In USB mode, press and hold SEL button (5) for about 2 seconds
until "ONE COPY" displays on LCD (17), then press VOL up or down
button (3) to choose ONE or ALL. Press ENT button (9) to confirm
selection.
• If ONE COPY is selected: The record percent "DOWN LOAD
xx%" will display on the LCD (17). After copying is finished, the
next track will automatically begin playback.
• If ALL COPY is selected: "the number of total track --> the
number of recorded track" will display on LCD (17). After
copying is finished, the unit will beep for about 3 seconds, then
automatically begin playback of track #1.
3. Deleting Music Files from NAND (internal memory)
In NAND mode, press and hold SEL button (15) for about 2 seconds
880 SERIES
Page 65