Wireless Remote Battery Replacement Procedure - Sundance Spas Cameo Owner's Manual

22.12 Wireless Remote Battery Replacement Procedure

1. Start by removing the rubber cover to the
remote (Figure A).
2. Turn the remote unit over and locate the battery door
(Figure B).
3. Rotate the battery door, with a coin, counterclockwise
until the dot aligns with the Open arrow (Figure C).
4. Remove battery door using coin to pry the door upward
(Figure D).
5. Replace battery using CR2025 or equivalent (Figure E).
6. Reinstall the battery cover, using the coin to close
(Figure F).
7. Reinstall rubber cover onto remote (Figure G).
Note: Remote unit is water resistant not waterproof,
therefore the unit should be stored in a dry location
within your home and never be left in the spa while
the cover is on and spa is not in use.
880 SERIES
Fig. A Fig. A
SNC SNC LIGHT LIGHT AIR AIR
SPA SPA
1 1 2/3 2/3
JETS JETS
Fig. B Fig. B
105358 105358
www.polyplanar.com www.polyplanar.com
Poly-Planar Inc. Poly-Planar Inc.
Warminster, PA 18974 Warminster, PA 18974
(215) 675-7805 (215) 675-7805
Made in China Made in China
OPEN OPEN CLOSED CLOSED
Fig. C Fig. C
OPEN OPEN
CLOSED CLOSED
Fig. D Fig. D
OPEN OPEN CLOSED CLOSED
Fig. E Fig. E
OPEN OPEN CLOSED CLOSED
CR2025 CR2025
Fig. F Fig. F
OPEN OPEN
CLOSED CLOSED
Fig. G Fig. G
LIGHT LIGHT AIR AIR
1 1 2/3 2/3
JETS JETS
Page 73