Scanning Sequence Examples; Errors While Scanning; Rfid Preferences Parameter Defaults - Motorola Symbol DS9808-R Manual

3 - 2 Symbol DS9808-R Product Reference Guide Supplement

Scanning Sequence Examples

In most cases scanning one bar code sets the parameter value. For example, to turn the beeper off, scan the Off
bar code under RFID Beeper Tone on page
green, signifying a successful parameter entry.
Other parameters require scanning several bar codes. See these parameter descriptions for this procedure.

Errors While Scanning

Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.

RFID Preferences Parameter Defaults

Table 3-1 lists the defaults for RFID preferences parameters. To change the default values, scan the appropriate
bar codes in this guide. These new values replace the standard default values in memory. To recall the default
parameter values, scan the
RFID Preferences Parameter Defaults
Table 3-1
Parameter
RFID Preferences
Multifunction Triggering
Trigger A
Trigger B
Trigger A + B
Laser Preferred Timeout
Dual Trigger Debounce Timeout
Dual Trigger Processing
Host Trigger Mode
RFID Beeper Tone
RFID Same Tag Timeout
RFID Automatic Presentation Mode
RFID Trigger Mode
RFID Data Transmission Format
RFID Transmit Raw with PC Bytes
RFID Transmit Unknown Tag Data
RFID Antenna Selection
3-11. The digital scanner issues a fast warble beep and the LED turns
parameter in the Symbol DS9808 Product Reference Guide.
Set Default
Parameter
Number
F1h 77h
F1h 78h
F1h 79h
F1h 7Dh
F1h 7Ah
F1h 7Bh
F1h 7Ch
F1h 7Fh
F1h 80h
F1h 81h
F1h 82h
F1h 83h
F1h CAh
F1h C5h
F1h C6h
Default
Single Trigger
Laser Preferred Decoding
RFID Reading
Ignore
1.5 seconds
0.05 seconds
Wait
Imager Decoding
Medium to High Tone (2-Tone)
5 Minutes
Hands-Free Only
Continuous
Raw
Disable
Transmit
Both
Page
Number
3-4
3-4
3-6
3-7
3-8
3-8
3-9
3-9
3-11
3-12
3-14
3-15
3-16
3-20
3-20
3-21