Connecting To An Rs-232/Ssi Interface - Motorola Symbol DS9808-R Manual

1 - 4 Symbol DS9808-R Product Reference Guide Supplement
Select the USB device type by scanning the appropriate bar code from the Symbol DS9808 Product Reference
3.
Guide.
On first installation when using Windows, the software prompts to select or install the Human Interface Device
4.
driver. To install this driver, provided by Windows, click Next through all the choices and click Finished on the
last choice. The digital scanner powers up during this installation.

Connecting to an RS-232/SSI Interface

Connect the RS-232/SSI interface cable to the serial port on the host.
1.
Connect the power supply adapter cable to the serial connector end of the interface cable.
2.
Connect the other end of the power supply adapter cable to the power supply.
3.
Plug the power supply into an AC outlet.
4.
Serial Connector
RS-232 Direct Connection
Figure 1-5
Select the RS-232 host type by scanning the appropriate bar code from the Symbol DS9808 Product
5.
Reference Guide, or if using SSI scan the appropriate baud rate bar code from
matches the host's baud rate setting.
RS-232/SSI Interface Cable
Power Supply
Power Supply Adapter Cable
Baud Rate on page 4-3 that