Removing the Interface Cable
Press the cable's modular connector clip through the access slot in the digital scanner's base.
1.
Removing the Cable
Figure 1-3
Carefully slide out the cable.
2.
Follow the steps for
3.
Connecting to a USB Interface
Plug the USB interface cable series A connector in the USB host or hub, or plug the Plus Power connector into
1.
an available port on the IBM SurePOS terminal.
If not using a PowerPlus cable, connect external power:
2.
Plug the power supply adapter cable into the power jack on the interface cable.
a.
Connect the other end of the power supply adapter cable to the power supply.
b.
Plug the power supply into an AC outlet.
c.
USB Connector
USB Connection
Figure 1-4
Connecting the Interface Cable
to connect a new cable.
Power Supply
Power Supply Adapter Cable
USB Interface Cable
Getting Started
1 - 3