Print Job Setting : Equipped With Silver Only; Printing Only With Metallic Silver Ink - Roland VS-540i Manual

3-3 Print Job Setting : Equipped with Silver Only

Printing Only with Metallic Silver Ink

This section describes how to perform printing only with the metallic silver ink. To use the metallic silver ink
in printing, you need to use the printing data where the use of the metallic silver ink is designated. If the
printing data have the portion designating the use of other colors, with the settings described in this section,
you can print with the metallic silver ink only the area of the image which has been designated to print with
the metallic silver ink.
 P. 12, "2-3 Creating Printing Data"
Procedure

Make sure that you have finished making the preparations for VersaWorks, getting the
printer ready, and creating the printing data ( P. 9, "Chapter 2 Getting Ready").



VS-640i_USE2_EN_R1.indb 41
Double-click .
"Queue A Properties" window appears.
Click .
For [Media Type], select names with [MT]
attached such as "Generic Vinyl 1 [MT]."
Make the selection that matches the media to be
used. Selecting an item attached with [MT] enables
you to choose the print mode that can use the me-
tallic silver ink.
For [Print Quality], select either [High
Quality] or [Standard].
For [Mode], select [MetallicSilver (v)].
Chapter 3 Printing
41
2013/07/23 19:00:29