Layered Print (Metallic Silver  Cmyklclmlk) - Roland VS-540i Manual

Layered Print (Metallic Silver  CMYKLcLmLk)
This section describes how to perform the layered print with the metallic silver ink and CMYKLcLmLk ink using
the metallic silver ink as background.
 P. 18, "Blend Print and Layered Print (Metallic Silver and CMYKLcLmLk)"
To perform the layered print, you need to use the printing data where the use of the metallic silver ink and
the CMYKLcLmLk ink is designated.
 P. 12, "2-3 Creating Printing Data"
(Image of printing method)
The metallic silver ink and the CMYKLcLmLk ink are separated into the differ-
ent layers and printed in that order. (Metallic silver ink  CMYKLcLmLk ink)
The printed image
is to be seen from
this side (the print-
ed surface of the
finished results).
Procedure

Make sure that you have finished making the preparations for VersaWorks, getting the
printer ready, and creating the printing data ( P. 9, "Chapter 2 Getting Ready").

VS-640i_USE2_EN_R1.indb 45
3-3 Print Job Setting : Equipped with Silver Only
Metallic Silver
CMYKLcLmLk
Double-click .
"Queue A Properties" window appears.
Chapter 3 Printing
Media
45
2013/07/23 19:00:29