Preparing Versaworks; Starting Versaworks; Creating A Folder For Saving Ps Files - Roland VS-540i Manual

2-1 Preparing VersaWorks

Starting VersaWorks

On the computer you are using, start VersaWorks. For information on how to start the program, see the Roland
VersaWorks Quick Start Guide. After starting the program, go to the upper left of the main screen and check to
make sure that "Model (or Nickname) of Your Printer" is displayed, and that "Status" is set to "Ready to Print."

Creating a Folder for Saving PS Files

Before you actually print an image you draw using application software such as Adobe Illustrator, it is necessary
to save the image as a PS file(s). And then, you can print the image by loading the PS file(s) on VersaWorks.
Because of this, you should create a folder for saving PS files in advance. It is recommended to locate the folder
in the root directory on your computer's local disk.
Procedure

Open [Computer] ( or [My Computer]), and then open [Local Disk (C:)].


10
Chapter 2 Getting Ready
VS-640i_USE2_EN_R1.indb 10
Create a new folder.
Click [File] , [Create New], and then [Folder], or click
"New Folder" from the menu.
Name the created new folder.
Here you name the folder "MT_print", for example.
2013/07/23 19:00:24