Layered Print (Metallic Silver  Cmyklclm) - Roland VS-540i Manual

3-2 Print Job Setting : Equipped with White & Silver
Layered Print (Metallic Silver  CMYKLcLm)
This section describes how to perform the layered print with the metallic silver ink and CMYKLcLm ink using
the metallic silver ink as background.
 P. 18, "Blend Print and Layered Print (Metallic Silver and CMYKLcLmLk)"
To perform the layered print, you need to use the printing data where the use of the metallic silver ink and
the CMYKLcLm ink is designated.
 P. 12, "2-3 Creating Printing Data"
(Image of printing method)
The metallic silver ink and the CMYKLcLm ink are separated into the differ-
ent layers and printed in that order. (Metallic silver ink  CMYKLcLm ink)
The printed
image is to be
seen from this
side (the printed
surface of the
finished results).
Procedure

Make sure that you have finished making the preparations for VersaWorks, getting the
printer ready, and creating the printing data ( P. 9, "Chapter 2 Getting Ready").

28
Chapter 3 Printing
VS-640i_USE2_EN_R1.indb 28
Metallic Silver
CMYKLcLm
Double-click .
"Queue A Properties" window appears.
Media
2013/07/23 19:00:27