Advanced Configuration And Fxs Ports Parameters - Grandstream Networks HandyTone-386 User Manual

HandyTone-386 User Manual
6.2.3

Advanced Configuration and FXS ports Parameters

To login to the Advanced Setting and FXS port configuration pages, administrator password is
required. The default administrator password is "admin". User can change the administrator password
here. The password is case sensitive and the maximum length is 25 characters.
• Advanced Settings Page:
Admin Password:
Layer 3 QoS:
Layer 2 QoS: 802.1Q/VLAN Tag
No Key Entry Timeout:
STUN server is :
keep-alive interval:
Use NAT IP:
Firmware Upgrade and
Provisioning:
Grandstream Device Configuration
BASIC
STATUS
SETTINGS
protection)
48
(Diff-Serv or Precedence value)
10
(in seconds, default is 4 seconds)
stun.sipserver.com
20
(in seconds, default 20 seconds)
Upgrade Via
Firmware Server Path:
Config Server Path:
Firmware File Prefix:
Config File Prefix:
Automatic Upgrade:
No
days)
Always Check for New Firmware
Check New Firmware only when F/W pre/suffix changes
ADVANCED FXS
SETTINGS PORT1
(purposely not displayed for security
0
802.1p priority value
(URI or IP:port)
(used in SIP/SDP message if specified)
TFTP HTTP
fm.grandstream.com/gs
fm.grandstream.com/gs
Yes, check for upgrade every
21
Grandstream Networks, Inc.
FXS
PORT2
0
(0-7)
Firmware File Postfix:
Config File Postfix:
10080
minutes (default 7