Grandstream Networks HandyTone-386 User Manual page 18

Analog telephone adaptor
Hide thumbs Also See for HandyTone-386:
Table of Contents

Advertisement

HandyTone-386 User Manual
After a correct password is entered in the login screen, the embedded Web server inside the
HandyTone-386 will respond with the Configuration pages which are explained in details below.
• Status Page:
MAC Address: 00.0B.82.00.00.00
IP Address: 192.168.1.109
Product Model: HT386
Software Version: Program-- 1.0.3.18 Bootloader-- 1.0.8.9 HTML-- 1.0.3.18 VOC-- 1.0.0.10
System Up Time: 0 day(s) 0 hour(s) 2 minute(s)
Registered: Yes
PPPoE Link Up: disabled
NAT: detected NAT type is full cone
MAC Address
IP Address
Product Model
Software Version
System Uptime
Registered
PPPoE Link Up
NAT
Grandstream Device Configuration
BASIC
STATUS
SETTINGS
All Rights Reserved Grandstream Networks, Inc. 2005
The device ID, in HEX format. This is very important ID for ISP
troubleshooting.
This field shows IP address of the HT386.
This field contains the product model info, such as HT386.
Program: This is the main software release. This number is always
used for firmware upgrade. Current release is 1.0.3.21
Bootloader: current version is 1.0.8.9.
HTML: current version 1.0.3.21.
VOC: current version is 1.0.0.10.htm
This shows system up time since last reboot.
Whether the unit is registered to service provider's server.
This shows whether the PPPoE is up if connected to DSL modem
This shows what kind NAT the HT386 is connected to. It is based on
STUN protocol. If the detected NAT is symmetric NAT, STUN will not
work and Outbound Proxy needed to make HT386 functioning
correctly.
ADVANCED
FXS
SETTINGS
PORT1
18
Grandstream Networks, Inc.
FXS
PORT2

Advertisement

Table of Contents
loading

Table of Contents