Replacement Parts List; Limited Warranty - Campbell Hausfeld HVLP Operating Instructions & Parts Manual

Operating Instructions and Parts Manual

Replacement Parts List

Ref
No. Description
1 Retaining Ring
2 Aircap
3 1.00 mm Needle/Nozzle Set
4 Nozzle Gasket
5 Air Flow Ring
6 Aircap Spring
7 Trigger Pin Kit (incl. #7 (2) & #9 (1))
8 Trigger Washer
9 Trigger Pin
10 Port Plug
11 1.00 mm Needle
12 Material Adjustment Knob
12a Adjuster Insert
13 Needle Spring
14 Pressure Tube Fitting
15 Handle Tube
16 Handle
17 Quick Connect Fitting

Limited Warranty

1.DURATION: From the date of purchase by the original purchaser as follows: Standard Duty Paint Application Systems and all Paint Application
Accessories - 1 year, Serious Duty Paint Application Systems - 3 years, Extreme Duty Paint Application Systems - 5 years.
2.WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld/A Scott Fetzer Company, 100 Production Drive, Harrison, Ohio, 45030,
Telephone: 1-800-626-4401.
3.WHO RECEIVES THIS WARRANTY (PURCHASER): The original purchaser (other than for purposes of resale or rental) of the Campbell Hausfeld
Product.
4.WHAT PRODUCTS ARE COVERED BY THIS WARRANTY: All non-compressor driven paint application systems, HVLP spraying systems, and paint
application accessories supplied or manufactured by the Warrantor.
5.WHAT IS COVERED UNDER THIS WARRANTY: Defects in material and workmanship which occur within the duration of the warranty period.
Warrantor will also cover normal wear items for a period of thirty days from the date of original purchase against defects in material and
workmanship. These wear items are: HVLP-filters, motor brushes, gun packing, gun canister seal, gun check valve and gun air flow ring; Airless-
inlet valve, outlet valve, gun valve, filters, tips, all seals and o-rings.
6. WHAT IS NOT COVERED UNDER THIS WARRANTY:
A. Implied warranties, including those of merchantability and FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED FROM THE DATE OF
ORIGINAL PURCHASE AS STATED IN THE DURATION. If standard duty product is used for commercial or industrial purposes, the warranty will
apply for ninety (90) days from the date of original purchase. If product is used for rental purposes, the warranty will apply for ninety (90)
days from the date of original purchase. Some states do not allow limitation on how long an implied warranty lasts, so the above limitations
may not apply to you.
B. ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE , OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE, OR
MALFUNCTION OF THE CAMPBELL HAUSFELD PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you.
C. Any failure that results from an accident, purchaser's abuse, neglect or failure to operate products in accordance with instructions provided in
the owner's manual(s) supplied with product. Accident, purchaser's abuse, neglect or failure to operate products in accordance with
instructions shall also include the removal or alteration of any safety devices. If such safety devices are removed or altered, this warranty is
void.
D. Normal adjustments which are explained in the owner's manual(s) provided with the product.
E. Items or services that are normally required to maintain the product: HVLP-filters, motor brushes, gun packing, gun canister seal, gun check
valve and gun air flow ring; Airless-inlet valve, outlet valve, gun valve, filters, tips, all seals and o-rings., or any other expendable part not
specifically listed, will only be covered for thirty days from date of original purchase.
7. RESPONSIBILITIES OF WARRANTOR UNDER THIS WARRANTY: Repair or replace, at Warrantor's option, products or components which are
defective, have malfunctioned and/or failed to conform within duration of the warranty period.
8. RESPONSIBILITIES OF PURCHASER UNDER THIS WARRANTY:
A. Provide dated proof of purchase and maintenance records.
B. Deliver or ship the Campbell Hausfeld product or component to the nearest Campbell Hausfeld Authorized Service Center. Freight costs, if
any, must be borne by the purchaser.
C. Use reasonable care in the operation and maintenance of the products as described in the owner's manual(s).
9. WHEN WARRANTOR WILL PERFORM REPAIR OR REPLACEMENT UNDER THIS WARRANTY:
A. Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the
availability of replacement parts.
B. If the purchaser does not receive satisfactory results from the Authorized Service Center, the purchaser should contact Campbell Hausfeld (see
paragraph 2)
This Limited Warranty applies in the U.S. and Canada only and gives you specific legal rights. You may also have other rights which vary from
state to state, or country to country.
Part Number Qty
HV104504AV 1
HV104505AV 1
HV104521SV 1
HV104524AV 1
HV104511AV 1
HV104512AV 1
HV104509AV 1
HV104508AV 2
Incl. in #7
HV104001AV 1
Inc. in #3
HV104502AV 1
HV104503AV 1
HV104513AV 1
HV004700AV 2
HV104501AV 1
HV103800AV 1
HV103901AV 1
Ref
No. Description
18 Packing Nut
19 Packing
20 Trigger
21 Pressure Tube
22 Canister Lid
23 Canister Seal
24 Nylon Washer
25 Canister Nut
26 Check Valve
27 Canister
28 Lever
29 Yoke Assembly
30 Material Tube Assembly
Wrench
Canister Assembly (incl. #22 - #30)
Pressure Tube Fitting Kit (incl. #14 & #21)
Air Flow Control Assembly
.75 mm Needle/Nozzle Set
Part Number Qty
HV104515AV 1
HV104514AV 1
HV104507AV 1
HV006201AV 1
DH962100AV 1
SK206401AJ 3
ST077903AV 1
DH077800AV 1
HV004400AV 1
DH077900AV 1
DH962400AV 1
DH962300AV 1
DH077300AV 1
HV104525SV 1
SK205800AJ 1
SK105100AJ 1
HV011301SV 1
HV104520SV 1