Wireless Network; Install The Drivers & Software - Brother MFC-J5910DW Quick Setup Manual

Wireless Network

Install the drivers & software
®
(Windows XP Home/XP Professional/Windows Vista
17
Before you install
Make sure that your computer is ON and you are
logged on with Administrator rights.
18
Install MFL-Pro Suite
a
Put the supplied installer CD-ROM into your
CD-ROM drive. Follow the on-screen
instructions.
b
The CD-ROM Top menu will appear. Click
Initial Installation.
c
Click Install MFL-Pro Suite and click Yes if
you accept the license agreements. Follow the
on-screen instructions.
d
Choose Wireless Network Connection, and
then click Next.
e
When Firewall/AntiVirus detected screen
appears, choose Change the Firewall port
settings to enable network connection and
continue with the installation.
(Recommended) and click Next.
If you are using a firewall other than the
®
Windows Firewall see the instructions
provided with your firewall software for
information on how to add the following
network ports.
 For network scanning, add UDP port 54925.
 For network PC-Fax receiving, add UDP port
54926.
 If you still have trouble with your network
connection, add UDP port 137 and 161.
f
Choose your machine from the list, and then
click Next.
Note
• If your machine is not found over the network,
confirm your settings by following the
on-screen instructions. If you encounter this
failure, go to step 15-b on page 16 and setup
the wireless connection again.
• If you are using WEP and the LCD displayed
Connected but your machine is not found on
the network, make sure you entered the WEP
key correctly. The WEP key is case sensitive.
20
® ®
/Windows 7)
g
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another.
h
When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions.
i
If you do not want to set your machine as the
Default printer, uncheck Set as Default Printer
and then click Next.
19
Finish and restart
a
Click Finish to restart your computer. After
restarting the computer, you must be logged on
with Administrator rights.
b
The following screens will appear.
• When the Check for Firmware Updates
screen appears, choose the firmware
update setting you want and click OK.
• When the Brother Product Research &
Support Program starts up, follow the
on-screen instructions.
Note
Internet access is required for the firmware
update and the Brother Product Research &
Support Program.
The installation is now
Finish
complete.
Now go to
Proceed to Install Optional Applications on
page 22.
Note
XML Paper Specification Printer Driver
The XML Paper Specification Printer Driver is the
most suitable driver for Windows Vista
®
Windows 7 when printing from applications that
use the XML Paper Specification documents.
Please download the latest driver by accessing
the Brother Solutions Center at
http://solutions.brother.com/.
®
Windows
®
and