13-12 ELECTRICAL SYSTEM
• Tighten the magneto rotor nut to the specified torque with the
special tool.
Magneto rotor nut: 55 N·m (5.5 kgf-m, 40.0 lb-ft)
09930-40113: Rotor holder
• Fit a new gasket.
• Install the magneto cover.
Magneto cover bolt: 11 N·m (1.1 kgf-m, 8.0 lb-ft)
INSPECTION AFTER INSTALLATION
After installing the stator and magneto rotor, inspect the follow-
ing.
• Wire harness routing (18-13)