• Clamp the axle holder 2 with a vise. Protect the axle holder
surface using a rag.
• Loosen the center bolt 3 completely with a 21 mm socket
wrench.
Clamping the axle holder too tight can damage it
which will affect riding stability.
Do not clamp the axle holder too tight.
• Compress the outer tube by hands and install the conrod
holder (special tool) between the axle holder bottom 2 and
lock-nut 4.
09910-20115: Conrod holder
• Hold the lock-nut with a wrench and remove the center bolt.
• Remove the push rod.
WARNING
FRONT FORK AND STEERING 16-5