Removal And Disassembly - Suzuki RM250 Owner's Service Manual

REMOVAL AND DISASSEMBLY

• Open the clamp 1.
• Disconnect the throttle position sensor coupler 2 and carbu-
retor solenoid coupler 3.
• Turn the fuel cock to OFF and disconnect the fuel hose 4.
• Loosen the carburetor clamp screws and remove the carbure-
tor.
To prevent dirt from entering the engine, seal the
intake pipe after removing the carburetor.
• Remove the carburetor top cap 5 along with the throttle valve
assembly.
Do not bend the throttle cable and do not damage the
throttle position sensor.
• Drain fuel by removing the drain plug 6.
• Unhook the throttle cable from the cable holder 7.
CAUTION
CAUTION
FUEL SYSTEM 11-3