Setting The Dosage - Miele G 7859 Operating Instructions Manual

Adding rinse aid
^ Add rinse aid only until the surface
is visible in the opening.
^ Close the flap firmly. The flap must
audibly engage, otherwise water
could get into the rinse aid reservoir
during the program.
^ Mop up any spilt rinse aid. This
prevents over-foaming occuring
during the next program.
The flap should always remain closed.
Only open it to add more rinse aid.
^ Wait until the rinse aid indicator light
H on the control panel lights up
again before adding any more rinse
aid.
22

Setting the dosage

The dosage adjuster (see arrow) in the
opening has settings adjustable from
1 to 6 (1-6 ml). It is set to "3" (3 ml) at
the factory as the recommended dose.
^ If there are flecks on utensils after
drying use a higher setting.
^ If clouding or smearing occurs on
utensils after drying use a lower
setting.