Miele G 7859 Operating Instructions Manual page 32

Programming special functions
3. Delay start and setting the delay
start time
The start of a wash program can be
delayed by up to 9 hours and 30
minutes in 30 minute stages.
Delay start should only be selected
with the Universal and Intensive
programs. Items in the machine
stand for a longer period before
being cleaned and residues can dry
on if the start time is delayed.
Delaying the start time in shorter
programs can impair cleaning
results.
a) To activate delay start
^ Turn the program selector to the f
"STOP" position.
^ Switch off the machine.
^ Press 4 and 6 at the same time,
hold them in and while doing so
switch the machine on with the I-0
button.
The current program status "P..."
appears in the display.
The p / 6 indicator light comes on.
^ Press 3 once, "E01" (programming
level 1) appears in the display.
^ Turn the program selector to the 8
o'clock position.
"80" or "81" appears in the display.
"80" = Delay start not selected.
"81" = Delay start activated.
^ Press 4 to change from "80" to "81"
or vice versa.
32
^ Press 6. "SP" appears in the display.
^ Press 6 again. The change has
been recorded.
Value set:
b) Setting the delay start period
The delay start period (from 30 minutes
to 9 hours and 30 minutes) must be set
before a program is started.
^ After selecting a program (see
"Switching on"), press the 4 button
or hold it in until the required value is
displayed. The "Delay Start" indicator
light comes on.
After the "Start" button 6 is pressed,
the delay start period will count down in
the display until the program
automatically starts.