Changing A Program; Selecting An Additional Function; Program Sequence Indicator; Switching Off - Miele G 7859 Operating Instructions Manual

Changing a program

Provided the "Start" button has not yet
been pressed, a wrongly selected
program may be changed as
described below, (if it has been
pressed see "Cancelling a program"):
^ Turn the program selector to the
required function.
^ Select additional function 3
(DRYING) again if required (see

"Selecting an additional function").

^ Press the "Start" 6 button.
Selecting an additional function
The following additional function can be
selected:
^ 3 DRYING
"Drying" may be selected as an
additional function as soon as a
program has been selected (except
with D "PRE-RINSE" and 6
"DRAIN"). The drying phase operates
with pulsed heating for 10 minutes.
The total running time of the program
is lengthened accordingly.

Program sequence indicator

The indicator light for the active
program stage lights up during the
program.
k
Reactivation
I
Pre-rinse
l
Main wash
m / H
Interim rinse / Final rinse
c
Drying (additional function)
Switching the machine on and off
Program end
The program has ended when no more
program sequence indicators are lit up
and the "Start" indicator light 6 has
gone out. An "0" is shown in the middle
of the display.
Use the 4 button to see how long a
program has to run or to see the actual
temperature.

Switching off

^ Press in and release the I-0 button.
As the machine is fitted with an
electric door lock, the door can only
be opened if the I-0 button is
pressed in (see "Opening and
closing the door").
29