Miele G 7859 Operating Instructions Manual page 36

Programming special functions
6. Audible tone
(Buzzer)
This special function allows you to
programme a buzzer (lasting up to a
maximum of 30 seconds) for the
following functions:
– Programme end = Constant buzzer
– Fault warning = Buzzer at one
second intervals
^ Turn the programme selector to
STOP f.
^ Switch the machine off.
^ Press and hold 4 and 6 at the
same time, and whilst doing so
switch the machine on with the I-0
button.
The current programme status "P..."
appears in the display and the p / 6
indicator lights up.
^ Press 3 once. E01 for programming
level 1 will appear in the display.
^ Turn the programme selector nine
switch positions clockwise (9 o'clock
position).
A number from 90 to 93 will appear in
the display.
90 = buzzer switched off.
91 = buzzer at end of programme
(standard setting)
93 = buzzer for all functions (at end
of programme and for faults).
^ Press 4 until the required function is
displayed.
^ Press 6. SP appears.
36
^ Press 6 again. The change has
been recorded.
Value set:
Note:
The buzzer can be switched off early
by
– turning the programme selector to
the STOP position f,
– interrupting the power supply (e.g.
by opening and closing the door).