8.4.4.
Remove the RM-Board
1. Remove the WR-Board. (See section 8.4.2.)
2. Remove the RF heat sink. (See section 8.4.3.)
3. Remove the screw (×1
4. Disconnect the connector (RM81) and remove the RM-
Board.
8.4.5.
Remove the Fan
1. Disconnect the connector (WR1). (See section 8.4.2.)
2. Remove the screw (×1
3. Remove the screws (×2
).
) and remove the Fan unit.
) and remove the Fan.
8.4.6.
Remove the Metal frame
1. Remove the screw (×1
41
) and remove the Metal frame.