Panasonic TU-Z100U Service Manual page 33

8.2.10. Remove the PB-Board
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (PB1, PB2, PB3, PB4, PB5
and PB6).
3. Remove the screws (×4
8.2.11. Remove the GH-Board
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (GH10 and GH11).
3. Remove the screws (×4
4. Remove the screws (×2
metal.
8.2.12. Remove the DA-Board
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (DA1, DA3, DA4, DA6, DA10,
DA11, DA30 and DA52).
3. Disconnect the flexible cables (DA20, DA31 and DA32).
4. Remove the screws (×7
) and remove the PB-Board.
) and remove the GH-Board.
) and remove the HDMI shield
) and remove the DA-Board.
5. Remove the screws (×2
DA-Board.
8.2.13. Remove the S-Board
1. Remove the Bottom plate (L). (See section 8.2.5.)
2. Disconnect the connector (S1).
3. Remove the screws (×2
8.2.14. Remove the KA-Board
1. Remove the Bottom plate (C). (See section 8.2.5.)
2. Disconnect the connector (KA1).
3. Remove the screws (×2
33
) and remove the Partition
) and remove the S-Board.
) and remove the KA-Board.