Panasonic TC-P54Z1 Quick Start Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Plasma TV
  5. Viera TC-P54Z1
  6. Quick start manual
Panasonic TC-P54Z1 Quick Start Manual

Panasonic TC-P54Z1 Quick Start Manual

54” class 1080p plasma hdtv
Hide thumbs Also See for TC-P54Z1:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Technical Manual
Please read these instructions before operating your set and retain them for future reference.
English
The images shown in this manual are for illustrative purposes only.

Operating Instructions

54" Class 1080p Plasma HDTV
(54.1 inches measured diagonally)
Model No.

Quick Start Guide

(See page 8-24)
For assistance (U.S.A./Puerto Rico), please call:
1-877-95-VIERA (958-4372)
or visit us at www.panasonic.com/contactinfo
For assistance (Canada), please call:
1-866-330-0014
or visit us at www.vieraconcierge.ca
TC-P54Z1
TM
ViV A
HD3D Sound
TQBC2488-1

Advertisement

Table of Contents
loading

Related Manuals for Panasonic TC-P54Z1

Summary of Contents for Panasonic TC-P54Z1

  • Page 1: Operating Instructions

    (54.1 inches measured diagonally) Model No. Quick Start Guide (See page 8-24) For assistance (U.S.A./Puerto Rico), please call: 1-877-95-VIERA (958-4372) or visit us at www.panasonic.com/contactinfo For assistance (Canada), please call: 1-866-330-0014 or visit us at www.vieraconcierge.ca TC-P54Z1 ViV A HD3D Sound...
  • Page 2 Turn your own living room into a movie theater! Experience an amazing level of multimedia excitement VIERA Link™ is a trademark of Panasonic Corporation. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

  • Page 3: Table Of Contents

    5510752, 5736897. Inc. BBE and BBE symbol are registered trademarks of BBE Sound, Inc. HDAVI Control™ is a trademark of Panasonic Corporation. The WiHD™ logo is licensed for use by WirelessHD, LLC. Contents Please read before using the unit Safety Precautions ·······································...

  • Page 4: Safety Precautions

    This Plasma TV is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability. The following accessories are manufactured by Panasonic Corporation. • Wall-hanging bracket (Vertical) TY-WK5P1SW Be sure to ask a qualified technician to carry out the installation and set-up.

  • Page 5: Ac Power Supply Cord

    AC Power Supply Cord To prevent fire or electric shock: The Plasma TV is designed to operate on a 120 V AC, 60 Hz service. Insert the power cord plug as far as it will go into the wall socket. If the plug is not fully inserted, heat may generate, which could cause a fire.
  • Page 6 To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by Panasonic Corp. of North America could void the user’s authority to operate this device.

  • Page 7: Notes

    The consumer electronics industry (of which Panasonic is a member) is committed to making home entertainment enjoyable and safe. To prevent personal injury or death, be sure to follow the following safety...

  • Page 8: Accessories/Optional Accessory

    Accessories/Optional Accessory Check you have all the items shown. Accessories Remote Control Transmitter N2QBYB000005 Tuner Box TU-Z100U Operating Instructions Viera Concierge and basic instruction for HDTV Wireless Unit set (Receiver and Transmitter) Optional Accessory Wall-hanging bracket (vertical) TY-WK5P1SW Hook Accessories Batteries for the Remote Control Transmitter (2)

  • Page 9: Assembling The Pedestal

    ■ Assembling the pedestal Be careful not to scratch the surface (part with gloss finish) of the base during assembly Remove the cable cover attached to the frame. (It will be used again after the pedestal is attached to the display Unit.) Fix securely with assembly screws Tighten screws firmly (tightening torque: 1.8 - 2.0 N•...
  • Page 10 Otherwise the TV may fall over and become damaged, and personal injury may result. Do not use the pedestal if it becomes warped or physically damaged. If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.

  • Page 11: Wired Connection

    (Continued) Connecting Display Unit, Tuner Box and Wireless Unit ■ Wired connection Connect Display Unit to Tuner Box Display Unit Tuner ■ Wireless connection Connect Wireless Unit (Receiver) to Display Unit Exclusive cable for Wireless Receiver ferrite core Assembly screws HDMI Cable Hole for Cable clamper...
  • Page 12 Accessories/Optional Accessory Connect Wireless Unit (Transmitter) to Tuner Box Exclusive cable for Wireless Transmitter ■ Cable Binding for Wireless Unit Wireless Unit (Receiver) Note Do not connect any other device than Wireless Unit to the HDMI terminal of the Display Unit/Tuner Box. Connect the Exclusive cable for Wireless Transmitter which has ferrite core to Tuner Box side.
  • Page 13 (Continued) Installing the Display Unit, Tuner Box and Wireless Unit approx. 10 m Precautions for Wireless Unit Transmission Range Use the Wireless Unit (Transmitter) within a straight line distance of 10 m (approx.) from the Wireless Unit (Receiver). The range may be shortened if there are any obstacles or the surrounding environment or building structure affects the transmission.
  • Page 14 Accessories/Optional Accessory Fasten the cables with the Cable clamper as necessary. When using the options, follow the option’s assembly manual to fix cables. Reference of connection Antenna terminal Firmly tighten by hand. Cable Binding Instructions To attach Cable clamper Insert To bundle hooks Pin terminals...

  • Page 15: Basic Connection

    For more details on the external equipment’s connections, please refer to the operating manuals for the equipment. When disconnecting the power cord, be absolutely sure to disconnect the power cord plug from the wall outlet first. For additional assistance, visit us at: www.panasonic.com VHF/UHF Antenna •...
  • Page 16 Basic Connection Example 2 Connecting DVD recorder (VCR) (To record/playback) AV Equipment (e.g. DVD Recorder or VCR) To connect the antenna terminal and DVD recorder or VCR AC 120 V 60 Hz AC Cord Connecting TV and AV equipment Please refer to VHF/UHF Antenna AV IN on p.
  • Page 17 Example 3 Connecting DVD recorder (VCR) and satellite receiver DVD Recorder To connect the antenna terminal and Satellite Receiver and DVD recorder or VCR AC 120 V 60 Hz AC Cord Connecting TV and AV equipment Please refer to on p. 18. Note For details of external equipment connections, please refer to the operating manuals for the equipment.
  • Page 18 Basic Connection To use HDMI terminals AV IN Connecting to HDMI terminals will enable you to enjoy high-definition digital images and high-quality sound. The HDMI connection is required for a 1080p signal. For “VIERA Link To use COMPONENT terminals Recorders may also be connected to COMPOSITE or S VIDEO terminals. (see below) To use S VIDEO terminals To use COMPOSITE terminals The S Video input will override the composite video signal when S Video cable is connected.

  • Page 19: Identifying Controls

    Red (blinking): Indicates malfunction When the red LED is blinking, turn the power of the Tuner Box and Display Unit off and then on again. If the problem is not resolved, consult your local Panasonic dealer. TV controls/indicators C.A.T.S. sensor. (Contrast Automatic Tracking System).
  • Page 20 Identifying Controls This TV uses a RF remote control. The remote control is operable when it is not facing the Display Unit or Tuner Box. As the radio waves reflect on walls or other obstacles, the remote control is operable even there are obstacles between the remote control and the Tuner Box.

  • Page 21: First Time Setup

    First Time Setup Make sure to register your remote control with the following procedure when the TV is turned on for the first time. Turn the TV On with the POWER button (Display Unit) (The Tuner Box power will be also turned on). Please have your remote control ready with batteries installed.

  • Page 22: Select Your Language

    First Time Setup “First time setup” is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when “Auto power on” (p. 42-43) is set to “No”. ■...

  • Page 23: Network Setting

    Select “Auto program” ANT/Cable setup ANT in Auto program Select scanning mode Auto program All channels Analog only Digital only Auto program Progress Number of analog channels Number of digital channels Press RETURN to quit. Confirm registered channels program Caption If OK is not pressed after selecting “Apply”, the channels will not be saved.

  • Page 24: Manual Setting

    First Time Setup ■ Press to exit from a menu screen Note About broadcasting systems Analog (NTSC): Conventional broadcasting Digital (ATSC): programming that allows you to view more channels featuring high-quality video and sound (Continued) Adjust the clock First time setup Language ANT/Cable setup Network setting...

  • Page 25: Watching Tv

    Watching TV Connect the TV to a cable box/cable, set-top-box, satellite box or antenna cable (p. 15-18) To watch TV and other functions Turn power on Select a channel number ■ To directly input the digital channel number example: CH15-1: Note Reselect “Cable”...
  • Page 26 Watching TV ■ Other Useful Functions ■ Displays or removes the channel banner. Information Recall ■ Press FORMAT to cycle through the aspect modes. Change aspect ratio Call up a favorite channel ■ Set Favorite Feature Display the SUB MENU. MENU Select “Set favorite”...

  • Page 27: Using Viera Tools

    Using VIERA TOOLS VIERA TOOLS is the easy way to access high use menu items. They are displayed as shortcut icons on the TV screen. Unlike a conventional menu, you can enjoy using, playing or setting a function quickly. Display VIERA TOOLS Select the item ■...

  • Page 28: Viewing From An Sd Card

    Viewing from an SD Card You can view movies and photos taken with a digital camera or digital video camera and saved on an SD card. (Media other than SD Cards may not be reproduced properly.) POWER VIDEO IN 2 INPUT/OK MENU S VIDEO VIDEO L-AUDIO-R...
  • Page 29 Insert the card Blue LED Label surface SD Card Push until a click is heard Compliant card type (maximum capacity): SDHC Card (16 GB), SD Card (2 GB), miniSD Card (1 GB) (requiring miniSD Card adapter) For cautions and details on SD Cards (p. 65) Blue LED lights while SD Card in inserted if set “SD card LED”...
  • Page 30 Viewing from an SD Card ■ Press to exit from a menu screen ■ Press to return to the previous screen Photo viewer Follow direction in Movie player Select the data to be viewed Thumbnail view Photo viewer All photos Total Pana0001 Pana0002...
  • Page 31 (Continued) ■ To sort by Folder, month or date Select sort type Photo viewer All photos Total Pana0001 Pana0002 Pana0003 Name Pana0001 Date 03/04/2009 Size 1029×1200 Pana0005 Pana0006 Pana0007 Select Sort Pana0009 Pana0010 Pana0011 RETURN Slideshow Folders Sort by month Select the directory.

  • Page 32: Watching Videos And Dvds

    Watching Videos and DVDs If you have applicable equipment connected to the TV, you can watch videos and DVDs on the TV’s screen. You can select the external equipment to access. ■ To return to TV Input Select With the connected equipment turned On Display the Input select menu Select the input mode Input select...

  • Page 33: Display Menu

    VIERA Link If you connect equipment that has the “HDAVI Control” function to a TV using an HDMI cable, you will find it easier to use. Please refer to p. 44-49. Before using these functions, you need to set “VIERA Link” setting to “On” as shown below. Display menu Select “Setup”...

  • Page 34: Viera Cast Tm

    VIERA CAST You can access information services (TV content) from the Home screen via the Internet. You need broadband environment to use this service. Preparations ■ Press to exit from a menu screen ■ Press to return to the Home screen ■...

  • Page 35: Connecting To The Internet

    Internet connections Contact your Broadband service provider NOTICE: If you don’t have Internet service by your local provider, please order a high-speed Internet service at no less than the following connection speed. If you already have such service, make sure that the connection speed exceeds the following. Required speed (effective): at least 1.5 Mbps for SD and 6Mbps for HD picture quality, respectively.

  • Page 36: Network Camera

    Before connecting a Network camera to the TV, please complete the “IP setting” and run a “Connection test” (p. 50) Note This feature is only available with Panasonic-made network cameras released after summer 2009. (Preliminary model numbers: BL-C210A and BL-C230A) A number of VIERA-compatible network cameras can be founded at the following sites: http://www.panasonic.com/...
  • Page 37 Example of Network Camera connection Back of the TV AV IN Cable/DSL modem Internet Display Menu Select “Setup” Menu Picture Audio VIERA Link SD card Closed caption Setup Select “Network cameras list” Setup Network VIERA Link settings Camera Network setting VIERA CAST setting setting Network cameras list...

  • Page 38: Displaying Pc Screen On Tv

    Displaying PC Screen on TV The screen of the PC connected to the unit can be displayed on the TV. You can also listen to PC sound with the audio cable connected. To connect PC (p. 62) Display the Input select menu Input select Component 1 Component 2...
  • Page 39 ■ PC menu setting (change as desired) Making settings “How to Use Menu Functions” Menu Item Reset to Resets PC adjust defaults Sync Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is Dot clock blurred. Adjusts the horizontal position.

  • Page 40: How To Use Menu Functions (Picture, Sound Quality, Etc.)

    How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions so that you can enjoy watching TV best suited for you. ■ Press to exit from a menu screen ■ Press to return to the previous screen Display menu...
  • Page 41 Adjustments/Configurations (alternatives) Resets all picture adjustments to factory default settings except for “Advanced picture”. Basic picture mode (Vivid/Standard/Studio ref/THX/Game/Custom) (p. 66) Adjusts color, brightness, etc. for each picture mode to suit your taste • Display range Contrast/Brightness/Color/Sharpness: 0 - 100 Tint: Selects a choice of Cool(blue), Normal, or Warm(red) color.
  • Page 42 How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions so that you can enjoy watching TV best suited for you. ■ Press to exit from a menu screen ■ Press to return to the previous screen Display menu...
  • Page 43 (Continued) Adjustments/Configurations (alternatives) Sets the mode to select the channel with Channel up/down button (All/Favorite/Digital only/Analog only) • Favorite: Only channels registered as FAVORITE (p. 26) Selects the screen menu language (p. 22) Adjusts the clock (p. 24) Sets channels (p. 56) Selects the terminal and label of the external equipment (p.

  • Page 44: Viera Link Tm "Hdavi Control Tm

    VIERA Link Simultaneously control all Panasonic “HDAVI Control” equipped components using one button on the TV remote. Enjoy additional HDMI Inter-Operability with Panasonic products which have the “HDAVI Control” function. This TV supports “HDAVI Control 4” function. Connections to the equipment (DVD recorder DIGA, HD Camcorder, Player theatre, RAM theater, Amplifier, etc.) with HDMI cables allow you to interface with them automatically.
  • Page 45 2CH audio. (When connecting to an AV amp via HDMI, you can enjoy higher sound quality.) For details about HDMI cable for connecting Panasonic HD camcorder, read the manual for the equipment. VIERA Link Connections...

  • Page 46: Viera Link

    VIERA Link ■ Press to exit from a menu screen ■ Press to return to the previous screen “HDAVI Control Display menu Select “Setup” Menu Picture Audio VIERA Link SD card Closed caption Setup Select “VIERA Link settings” Setup VIERA Link settings Network setting VIERA CAST setting About...
  • Page 47 “TV” to “Theater”. Sound will be output from the Home Theater whenever the TV is powered on. If the “ONE TOUCH PLAY” key is pressed on the remote control for Panasonic Home Theater system, the following sequence of operations is performed automatically.
  • Page 48 VIERA Link You can enjoy more convenient operation with the “HDAVI Control” function in the “VIERA Link” menu. For more details on the “HDAVI Control” function, refer to p. 44 ■ Press to exit from a menu screen ■ Press to return to the previous screen “HDAVI Control...
  • Page 49 (Continued) You can select Home theater or TV speakers for audio output. Control theater speakers with the TV’s remote control. This function is available only when Panasonic Amplifier or Player theater is connected. Select “Speaker output” Select “Home theater” or “TV”...

  • Page 50: Network Setting

    Network Setting This is a setting for connecting to a broadband environment. ■ Press to exit from a menu screen ■ Press to return to the previous screen Display menu Select “Setup” Menu Picture Audio Timer Lock VIERA Link SD card Closed caption Setup Select “Network setting”...
  • Page 51 Check that the network settings are as shown below, and then start “Connection test”. Select “Connection test” and press OK. *Press OK again to cancel the test. (It takes a while to cancel the test.) Network setting Connection test Succeeded IP setting mode Manual IP address...

  • Page 52: Viera Cast Setting

    VIERA CAST ■ Press to exit from a menu screen ■ Press to return to the previous screen Setting Display menu Select “Setup” Menu Picture Audio Timer Lock VIERA Link SD card Closed caption Setup Select “VIERA CAST setting” Setup VIERA Link settings Network setting VIERA CAST setting...
  • Page 53 Select “Connection test” and Press OK VIERA CAST setting Proxy address Proxy port Connection test Set only if specified by the provider. It is not required for normal household use. ■ Proxy address This is the address of the relay server that is connected to the target server instead of the browser and sends data to the browser.

  • Page 54: Lock

    Lock You can lock specified channels or shows to prevent children from watching objectionable content. ■ Press to exit from a menu screen Caution Make a note of your password in case you forget it. (If you have forgotten your password, consult your local dealer.) Note...
  • Page 55 ■ To select the channel or the rating of the program to be locked Select up to 7 (1-7) channels to be blocked. These channels will be blocked regardless of the program rating. Select “Mode” and set to “Custom” Select channel to lock. Channel lock Channel lock...

  • Page 56: Editing And Setting Channels

    Editing and Setting Channels The current channel settings can be changed according to your needs and reception conditions. ■ Press to exit from a menu screen Display menu Select “Setup” Menu Picture Audio Timer Lock VIERA Link SD card Closed caption Setup Select “ANT/Cable setup”...
  • Page 57 Automatically searches and adds available channels to the memory. Select “ANT in” Select Cable or Antenna Or select “Not used” (p. 22). Select “Auto program” ANT/Cable setup next Cable ANT in Auto program Manual program select Signal meter Use this procedure when changing the channel setup or changing the channel display.

  • Page 58: Closed Caption

    Closed Caption ■ Press to exit from a menu screen The television includes a built-in decoder that is capable of providing a text display of the audio. The program being viewed must be transmitting Closed caption (CC) information. (p. 64) ■...

  • Page 59: Input Labels

    Input Labels Display menu Select “Setup” Menu Picture Audio Timer Lock VIERA Link SD card Closed caption Setup Select “Input labels” Setup Channel surf mode Language Clock ANT/Cable setup Input labels ■ Press to exit from Anti image retention Remote control registration a menu screen Devices connected to external input terminals can be labeled for easier identification during input selection.

  • Page 60: Using Timer

    Using Timer The TV can automatically turn On/Off at the designated date and time. The Clock must be set before On time/Off time settings. (p. 24) The “Sleep” timer and “On / Off timer” will not work if the “Auto power on” (p. 42) is set. ■...

  • Page 61: Remote Control Registration

    Remote control registration Remote control registration can be set on the “Setup” screen. Display “Remote control registration” POWER VIDEO IN 2 INPUT/OK MENU S VIDEO VIDEO L-AUDIO-R INPUT/OK MENU Select “Yes” [Registered remote control: 5 or less] Remote control registration. 2* of 5 remotes registered.

  • Page 62: Recommended Av Connections

    These diagrams show our recommendations or how to connect the TV unit to your various equipment. For other connections, consult the instructions for each piece of equipment and its specifications. For additional assistance, please visit our website at: www.panasonic.com AC 120 V...

  • Page 63: Ratings List For Lock

    Ratings List for Lock “V-chip” technology enables you to lock channels or shows according to standard ratings set by the entertainment industry. (p. 55) ■ U.S. MOVIE RATINGS (MPAA) NO RATING (NOT RATED) AND NA (NOT APPLICABLE) PROGRAMS. Movie which has not been rated or where rating does not apply.

  • Page 64: Technical Information

    Technical Information For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST, ZOOM or 4:3; characters might be cut off). The CC can be displayed on the TV if the receiver (such as a set-top box or satellite receiver) has the CC set On using the Component or HDMI connection to the TV.
  • Page 65 Electrical interference, static electricity or erroneous operation may damage the data or card. Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the unit. (Panasonic is not liable for any deterioration or damage of recorded data.) Message SD card slot is empty.
  • Page 66 Technical Information HDMI connections to some Panasonic equipment allow you to interface automatically. (p. 44) This function may not work normally depending on the equipment condition. The equipment can be operated by other remote controls with this function on even if TV is in Standby mode.
  • Page 67 Aspect Ratio: 4:3 Size 1 Aspect Ratio: FULL/JUST(H-FILL/ZOOM) Size 1 See pages 40-41 for more information Do not display a picture in 4:3 mode for an extended period, as this can cause “Image retention” to remain on either or both sides of the display field. To reduce the risk of such “Image retention”, change the brightness of the side bars.

  • Page 68: Care And Cleaning

    Technical Information Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.) Some PC models cannot be connected to the set.

  • Page 69: Specifications

    Specifications Power Source AC 120 V, 60 Hz Display Unit: 476 W / Tuner Box: 35 W Maximum (Wireless Unit (Receiver) 12 W / Wireless Unit (Transmitter) 10 W) Standby condition Display Unit: 0.2 W / Tuner Box: 0.2 W Drive method AC type Aspect Ratio...

  • Page 70: Faq

    Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer or Panasonic Service Center for assistance. For details (p. 73, 74) For additional assistance, please contact us via the website at: www.panasonic.com/contactinfo...
  • Page 71 If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model number and serial number (both found on the rear of the TV).

  • Page 72: Limited Warranty (For U.s.a. And Puerto Rico Only)

    Limited Warranty Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product...

  • Page 73: Customer Services Directory

    ■ For hearing or speech impaired TTY users, TTY: 1-877-833-8855 Accessory Purchases (United States and Puerto Rico) Purchase Parts, Accessories and Instruction Books on line for all Panasonic Products by visiting our Web Site at: http://www.pstc.panasonic.com or, send your request by E-mail to: npcparts@us.panasonic.com...

  • Page 74: Limited Warranty (For Canada)

    (54.1 inches measured diagonally) TC-P54Z1 Model No. Quick Start Guide (See page 8-24) For assistance (U.S.A./Puerto Rico), please call: 1-877-95-VIERA (958-4372) or visit us at www.panasonic.com/contactinfo For assistance (Canada), please call: 1-866-330-0014 or visit us at www.vieraconcierge.ca ViV A HD3D Sound TQBC2488-1...
  • Page 75 If removal is required to service the product, it will be at the discretion of the Servicentre and in no event will Panasonic Canada Inc. or the Servicentre be liable for any special, indirect or consequential damages.
  • Page 76 Note...
  • Page 77 Warranty Service purposes. Model Number Web Site: http://panasonic.net/ © Panasonic Corporation 2009...

This manual is also suitable for:

Tc-p54z1 - 54.1" plasma tv

Table of Contents