Panasonic TU-Z100U Service Manual page 226

3. Procedure for disassemble a rear cover
Step 1.
Remove all screws.
A rear cover can not remove from the cabinet due to the Sarcon sheet.
Don't lift a rear cover forcedly to avoid a deformation of rear cover.
Step 2. Insert a plastic thin scale (A) between a Sarcon sheet and a rear cover a little bit at a
time carefully, at the same time lift a rear cover (B) slowly.
Repeat this mean until a Sarcon sheet is peeled from a rear cover .
Step 3. Take out a rear cover.
Be careful not to deform it since a rear cover is easy to bend at center portion.
(B)
(A)
Plastic thin tool
(over 300mm
long)
(B)
(A)
<Side View>
Rear Cover
P (Filter) Board
Cabinet and Plasma Panel
Sarcon sheet
Sarcon sheet