Panasonic KX-FLB852CX Service Manual page 86

KX-FLB852CX / KX-FLB852CXS
Code
592 CNG transmit select
593 Time between CED and 300bps
594 Overseas DIS detection select
595 Receive error limit value set
596 Transmit level set
598 Receiving sensitivity
599 ECM frame size
639 LSU test
651 Write system program into the Flash Rom with a tool.
655 Cause Distinction Code of Call Service 3
670 Update the number of maintenance
710 Memory clear except History data
717 Transmit speed selection
718 Receive speed selection
721 Pause tone detect
722 Redial tone detect
763 CNG detect time for friendly
reception
774
815 Sensor & Vox check
852 Print test pattern
853 Top margin
854 Left margin
874 DTMF ON time
875 DTMF OFF time
880 History list
881 Journal 2 list
882 Journal 3 list
885 the holding time set
Function Set Value
1:OFF
2:ALL
3:AUTO
1:75 msec
2:500 msec
3:1 sec
1:detects at
the 1st time
2:detects at
the 2st time
1: 5%
2: 10%
3: 15%
4: 20%
X dBm
43= -43 dBm
1:256 2:64
1:Change
maintenance
kit
1:14400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS
1:14400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS
1:ON 2:OFF
1:ON 2:OFF
1:10 sec
2:20 sec
3:30 sec
T4 timer X 100 sec
X msec
X msec
Effective Default
Range
1~3 2 Lets you select the CNG output during FAX
transmission. ALL: CNG is output at phase A.
AUTO: CNG id output only when automatic dialing
is performed. OFF: CNG id not output at phase A.
Refer to (P.141).
1~3 1 See Symptom/Countermeasure Table for long
distance and international calls in (P.148). Refer
to (P.142) and (P.148).
1, 2 1 See Symptom/Countermeasure Table for long
distance and international calls in (P.148). Refer
to (P.141) and (P.148).
1~4 2 If the number of errors during transmission
exceeds this value, the sending side terminates
the call.
- 15~00 10 Selects the FAX transmission level. Refer to
(P.141) and (P.142).
20~48 43 Used when there is an error problem. Refer to
(P.148).
1, 2 1
See (P.88).
See the parts number of the tool. (P.332). The
tool includes the operating manual for writing
program.
See (P.111).
0, 1 - When #670 is entered, the setting value is not
displayed. Press Set key, and the unit rings a
beep sound and the number of maintenance kit
exchange record is increased.
Refer to Memory Clear Specification (P.87).
1~6 1 Adjusts the speed to start training during FAX
transmission. Refer to (P.141) and
1~6 1 Adjusts the speed to start training during FAX
reception. Refer to (P.142) and
1, 2 --- Selects the tone detection for pause in dialing.
1, 2 1 Sets the tone detection mode after redialing.
1~3 3 Selects the CNG detection tone of friendly
reception.
00~99 00 Use this function when delay occurs in the line
(ex. Mobile comm) does not work well.
See (P.88).
See (P.88).
1~5 3
1~7 4
060~200 90
060~200 90
See (P.102).
See (P.146).
See (P.146).
10~60 20 Sets the holding time to avoid printing from PC
while copying.
86
Remarks
----------
and communication.
----------
----------
----------
----------