KX-FLB852CX / KX-FLB852CXS
11.
Install the drum and toner unit (1) by holding the tabs.
• • • • Make sure that the triangles (2) match to install the drum and toner
unit correctly.
Close the top cover, holding the cover release lever (1). Then push
12.
down the right centre edge, until locked.
Caution:
• • • • To prevent injuries, be careful not to put your hands
under the top cover.
Note:
• • • • While the unit displays "PLEASE WAIT", do not open the top cover, or turn the power switch OFF.
Waste disposal method
Waste material should be disposed of under conditions which meet all national and local environmental regulations.
32