Specifications - Panasonic KX-FLB852CX Service Manual

KX-FLB852CX / KX-FLB852CXS
2.2.

SPECIFICATIONS

Applicable Lines:
Document Size:
Effective Scanning Width:
Effective Printing Width:
Transmission Time*:
Scanning Density:
Photo resolution:
Scanner Type:
Printer Type:
Data Compression System:
Modem Speed:
Operating Environment:
Dimensions (H×W×D):
Mass (Weight):
Power Consumption:
Power Supply:
Fax Memory Capacity:
Laser diode properties:
Print Speed:
Printing Resolution:
* Transmission speed depends upon the contents of the pages, resolution, telephone line conditions and capability of the other
party's machine.
** Transmission speed is based upon the ITU-T No. 1 Test Chart. (Refer to ITU-T No.1 TEST CHART (P.283).) If the capability of
the other party´s machine is inferior to your unit, the transmission time may be longer.
***: Standby (Ready) means state that fuser unit is pre-heated for 1st speed up. User can change the time of this pre-heating mode
by below user programming mode. [#403 power save feature] (1) 5 minutes / (2) 15 minutes (default) / (3) 30 minutes / (4) 1 hour
Note:
• • • • Design and specifications are subject to change without notice.
• • • • The pictures and illustrations in these instructions may vary slightly from the actual product.
Public Switched Telephone Network
Max. 216 mm in width
Max. 600 mm in length
208 mm
208 mm
Approx. 4 s/page (ECM-MMR Memory transmission)**
FAX resolution:
Horizontal:
8 pels/mm (203 pels/inch)
Vertical:
3.85 lines/mm (98 lines/inch)-STANDARD
7.7 lines/mm (196 lines/inch)-FINE/PHOTO
15.4 lines/mm (392 lines/inch)-SUPER FINE
Copy resolution:
Up to 600 × 600 dpi
Scanning resolution:
Up to 600 × 1200 dpi (Optical)
Up to 9600 × 9600 dpi (interpolated)
64-level
Charge Coupled Device (CCD)
Laser printer
Modified Huffman (MH), Modified READ (MR), Modified Modified READ (MMR)
33,600 / 31,200 / 28,800 / 26,400 / 24,000 / 21,600 / 19,200 / 16,800 / 14,400 / 12,000
/ 9,600 / 7,200 / 4,800 / 2,400 bps; Automatic Fallback
10°C—32.5°C (50°F—90.5°F), 20—80% RH (Relative Humidity)
Approx. 312 mm × 773 mm × 444 mm (12
Approx. 18 kg (39.7 lb.)
Standby: Approx. 11 W (When the fans stop)
Standby (Ready): Approx. 75 W
Transmission: Approx. 28 W
Reception: Approx. 400 W
Copy: Approx. 430 W
Maximum: Approx. 900 W (When the fuser lamp turns on)
220-240 V AC, 50/60 Hz
10 MB in total
Approx. 630 pages of memory reception with back-up
(Max. 255 pages per one reception)
Approx. 150 pages of memory transmission
(Based on the ITU-T No. 1 Test Chart in standard resolution.)
Laser output: Max. 5 mW
Wave length: 760 nm—800 nm
Emission duration: Continuous
18 ppm (page per minute)
600 × 600 dpi
10
5 7
/ " × 30 / " × 17
16 16
***
1
/ ")
2