Choosing A Location - Brother FAX4750 Service Manual

Choosing a Location

Place your machine on a flat, stable surface, such as a desk. Select a place
that is free of vibration and shocks. Locate the machine near a telephone
jack and a standard, grounded power outlet.
Avoid placing your machine in a high-traffic area. Do not place near
heaters, air conditioners, water, chemicals or refrigerators. Do not expose
the machine to direct sunlight, excessive heat, moisture or dust. Make
sure nothing blocks the flow of air from the fan on the sides of the
machine. Do not connect your machine to electrical outlets controlled by
wall switches or automatic timers. Disruption of power can wipe out
information in the unit's memory. Do not connect your machine to
electrical outlets on the same circuit as large appliances or other
equipment that might disrupt the power supply. Avoid interference
sources, such as speakers or the base units of cordless phones.
NO ! NO ! NO !
WARNING
Never install telephone wiring during a lightning storm.
We recommend that this product be used with a surge protection device to
protect the product against lightning storms.
Never install a telephone jack in a wet location unless the jack is
specifically designed for a wet location.
Never touch telephone wires or terminals that are not insulated unless the
telephone line has been disconnected at the network interface.
Use caution when installing or modifying telephone lines.
Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak.
For PLUGGABLE EQUIPMENT, the socket-outlet should be installed
near the equipment and should be easily accessible.
To reduce the risk of shock or fire, use only a No. 26 AWG or larger
telecommunications line cord.
2 - 2 A S S E M B L Y A N D C O N N E C T I O N S