Brother FAX4750 Service Manual page 405

Difficulty
General
The machine does not
print.
Printing
Difficulties
The machine prints
unexpectedely or it
prints garbage.
The machine cannot
print full pages of a
An error
message
PRINT OVERRUN
occurs.
The machine prints
first couple of pages
correctly, then some
pages have text missing.
The machine cannot
print full pages of
a document.
A MEMORY FULL
message occurs.
My headers or footers
appear when I view
my document on the
screen but do not
up when I print
them.
®
Windows
I cannot print from my Make sure the Windows
Setup
application software.
Printing
Difficulties
17 - 10 T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
Suggestions
Check the following:
• The machine is plugged in. (See page 2-8.)
• The toner cartridge and drum unit are installed
properly. (See page 2-3.)
• The interface cable is securely connected
between the machine and computer.
(See page 12-3 or 12-9 for MFC 8300, or See
MFC Software Manual page 2-3 or 2-10 for
MFC 8600.)
• Check to see if LCD is showing an error
message. (See page 17-2.)
Reset the machine or unplug the electrical cord
and plug it back in. Check the primary settings
in your application software to make sure it is
set up to work with your machine.
The machine received a very complex print job
and could not process part of the page. Thisprint.
may be solved in several ways. If you are using
®
Windows 3.1x, Windows
®
Windows NT Workstation Version 4.0 with the
supplied printer driver, see the "Windows
Setup Printing Problems" section. Try to
reduce the complexity of your document or
reduce print resolution.
Your computer is not recognizing the printer's
input buffer full signal. Please make sure to
connect the printer cable correctly.
• Reduce the printer resolution. Reduce the
complexity of your document and try again.
Reduce the graphic quality or the number of
font sizes within your application software.
• Expand the printer memory by installing one
of the optional memory boards (ME8000 or
ME16000).
Most laser printers have a restricted area that
will not accept print. Usually these are the first
two lines and last two lines, leaves 62 printable
lines. Adjust the but do not show up when show
top and bottom margins in your document to
allow for this.
installed and you select it in your application
software.
®
95/98 or
®
®
printer driver is