Using Your Brother Machine With Your Apple New Power Macintosh G3 Or Imac (For Mfc 8300 And Mfc 8600 Only); For Usb Equipped Apple New Power Macintosh G3 Or Imac With Mac Os 8.5/8.6; Brother Printer Driver For Mfc 8300 - Brother FAX4750 Service Manual

18
18
For USB equipped Apple New Power
Macintosh G3 or iMac with Mac OS 8.5/8.6
The connection, installation and operation instructions are available on
the bundled CD-ROM for your USB equipped Apple Macintosh or iMac
with Mac OS 8.5/8.6.
1
Set up your MFC and make sure that it is working properly.
2
Unplug the MFC's AC power cord and turn off the AC power to your
Macintosh or iMac.
3
Connect a standard USB cable to both the MFC and Macintosh or iMac.

Brother Printer Driver for MFC 8300

1
Insert the Brother CD-ROM into your CD-ROM drive.
The Brother icon will appear on the desk top.
2
Double-click the Brother icon to open the CD.
3
Double-click the Brother icon again to run Start.
The screen of Brother options will appear:
4
Click Install MFC Print Driver to begin the installation and follow the
instructions on the screen.
5
After you have installed the Driver, click View On-Line Documentation
for operation instructions.
Restart your Macintosh/iMac so it recognizes the new drivers.
U S I N G B R O T H E R
Using Your Brother Machine
with Your Apple
Macintosh
(For MFC 8300 and MFC 8600 Only)
M A C H I N E
®
G3 or iMac
W I T H Y O U R A P P L E
®
New Power
™
I M A C 18 - 1