Multi-Purpose Tray Paper Sensor; Itb Home Position Sensor - Canon CLBR 460ps Service Manual

CHAPTER 3
L. Multi-purpose Tray Paper Sensor
1) Remove the multi-purpose pick-up unit
according to the multi-purpose pick-up
unit removal procedure on page 3-14.
2) Place the multi-purpose pick-up unit
upside down.
3) Unhook the claw and then remove the
feed drive gear unit.
4) Remove the screw, disconnect the con-
nector, and then remove the feed roller
unit.
Claw Feed drive gear unit
Screw Connector
Feed roller unit
Figure 3-5-9
5) Unhook the claw and then remove the

multi-purpose tray paper sensor.

< Note for reassembly >
When reassembling the feed drive gear unit,
make sure to insert the shaft of the feed
drive gear to the joint correctly.
3 - 40
M. ITB Home Position Sensor
1) Remove the screw from the ITB unit,
and then remove the ITB left cover.
Screw ITB left cover
ITB unit
Figure 3-5-10
2) Remove the screw, disconnect the con-
nector, and then remove the ITB home
position sensor unit.
Screw Connector
ITB home position sensor unit
Figure 3-5-11
3) Remove the screw and then the ITB
home position sensor.