Book Copy (Book Scan) - Konica Minolta Bizhub C451 Operation Manual

Saving documents
4
Select the width of the area to be erased.
– To use frame erasing, touch [Yes].
– To erase the same width on all sides, touch [Frame], and then specify a value.
– To specify different widths for the top, left, right and bottom, touch the button for the desired
location, and then specify a value. To cancel frame erasing, touch [None].
5
Touch [OK], and then touch [OK] in the next two screens that appear.

Book copy (Book scan)

Select the method for scanning page spreads. The following four scanning methods are available. In addition,
the binding position and erase settings can be specified.
Setting
Book Spread
Separation
Front Cover
Front + Back Covers
Note
Specify the size of the page spread as the scan size.
The document can be scanned while erasing the shadows typical for page spreads.
Parameter
Frame Erase
Center Erase
Note
If a width to be erased around the document is specified with "Frame Erase" with the "Book Copy"
function, the same settings are also applied on the Frame Erase screen (displayed from the Erase
screen).
bizhub C650/C550/C451 (FE3)
Description
Select this setting to scan a page spread as a single page.
Select this setting to scan a page spread as two separate pages (left and right).
Select this setting to scan the first page as the front cover.
Select this setting to scan the first page as the front cover, the second page as the
back cover, and the remaining pages as the body.
Description
An area around the edge of the document can be erased. Areas with a width be-
tween 0.1 mm and 50.0 mm can be specified separately for the left and right sides
and the top and bottom.
An area along the center of the document can be erased. An area with a width be-
tween 0.1 mm and 30 mm can be specified.
3
3-47