E-Mail Settings (Communication Settings) - Konica Minolta Bizhub C451 Operation Manual

6

E-mail settings (Communication settings)

When data is sent, an e-mail message containing the document name can be sent to the specified e-mail
address.
Settings can be specified for the following.
Parameter
Document Name
Subject
From
Body
Note
If "Change the From Address" (displayed by touching [System Settings] on the Administrator Settings
screen, then [Restrict User Access], then [Restrict Access to Job Settings]) is set to "Restrict", the From
address cannot be entered directly.
1
Touch [Communication Settings] in a screen for selecting a destination.
2
Touch [E-Mail Settings].
3
Specify the e-mail transmission settings.
4
Touch [Close], and then touch [Close] in the next screen that appears.
6-26
Description
The name of the file to be saved is displayed. The document name specified later ap-
pears as the document name, even if the document name was specified in the File Doc-
ument screen. A maximum of 30 characters can be entered.
The text specified from Utility mode is automatically displayed. Touch [Direct Input] to
change the text. A maximum of 64 characters can be entered.
The e-mail address specified from Utility mode is automatically displayed.
The text specified from Utility mode is displayed. Touch [Direct Input] to change the text.
A maximum of 256 characters can be entered.
Sending a user box document
bizhub C650/C550/C451 (FE3)