Adjusting The Brightness Of The Leds; Changing The Functions Of The Rotary Encoders - Sony CCU-TX50 Operating Instructions Manual

To turn on/off the buzzers independently
Press the corresponding button. When it is lit, the
buzzer is on.
[Call Buzzer]
: For the buzzer sound when a call signal
is received
[Touch Click]
: For the buzzer sound when a button
displayed on the menu display is operated
[SW Click]
: For the buzzer sound when a button on
the panel is operated
To turn off all the buzzers
[All Off]
Press and light .
When the adjustment is completed
[Exit]
Press to leave the menu.
Adjusting the Brightness of the
LEDs
You can adjust the brightness of the LEDs of the panel
buttons and camera number/tally indication window.
To adjust the brightness, proceed as follows.
1
[RCP Adjusting]
Press
display the RCP adjustment menu.
2
[LED Bright]
Press and light
The lower half of the display becomes the LED
Brightness adjustment display.
Clear
Buzzer LED
Volume Bright
LED
Brightness
Switch Tally
50 50
3
Adjust the brightness with the corresponding
control knobs (50 is the standard value with all
items).
Switch: Brightness of the built-in LEDs of the
control buttons
Tally: Brightness of the built-in LEDs of the
camera number/tally indication window
Other: Brightness of the other LED indicators/
on the RCP Config menu to
.
Exit
Other Master
50 50
lamps, including the master black indicator and
f-number indicator
The master brightness can be adjusted with the
rightmost control knob (Master).
When the adjustment is completed
[Exit]
Press to leave the menu.
Changing the Functions of the
Rotary Encoders
You can change the functions of BLACK/FLARE
control knobs.
Proceed as follows:
1
[RE Setting]
Press on the RCP Config menu to
obtain the Rotary Encoder Setting display.
RCP Config Menu
RE Setting
Rotary Encoder
Setting
BLACK / FLARE
Black Flare
2
When changing the function of the BLACK/
FLARE control knobs, press
desired.
When the adjustment is completed
[Exit]
Press to leave the menu.
Exit
[Black] [Flare]
or as
93