Menu Items With The Dxc-D30/D35-Series Cameras - Sony CCU-TX50 Operating Instructions Manual

Menu Configuration and Basic Menu Operations

Menu Items with the DXC-D30/D35-Series Cameras

The "Control items" marked with
to the control knobs. The other items are operated on
the menu display.
Paint menu (with the DXC-D30/D35 series)
Paint menu consists of pages 1 to 4.
You can select page 1 through 3 directly by pressing
the MENU buttons, PAINT 1, PAINT 2, or PAINT 3.
Pressing v or V of the page selected with a MENU
button flip pages 1 through 4 in sequence.
Page Menu
Paint 1 White
Black
Flare
Gamma/Knee
80
are those assigned
z
Submenu Control item
White Preset
Auto
Manual
ATW
• R
• B
Auto
Manual
• R
• B
• Master
Flare Off
• R
• G
• B
DL
Knee Preset
Auto Knee
• Gamma
• Knee Point
• Knee Slope
The items displayed differ according to whether the
unit is in Advanced Setting mode or in Normal Setting
mode. The items shaded (
displayed only in Advanced Setting mode.
Switching between Normal Setting mode and
Advanced Setting mode is performed in RCP Config
(Security → Status) on the OTHERS menu.
Paint 4 can also be selected by pressing the PAINT 3
button.
Function
To retrieve the preset white balance settings in the camera
To select the auto white balance adjustment mode
To select the manual white balance adjustment mode
To turn ON/OFF the Auto Tracing White function (which
automatically adjusts the white balance when lighting conditions
change)
To adjust the gain for the R signal in the white when Manual is
pressed
To adjust the gain for the B signal in the white when Manual is
pressed
To select the auto black balance adjustment mode
To select the manual black balance adjustment mode
To adjust the gain of the R signal in the black
To adjust the gain of the B signal in the black
To adjust the master black
To turn the flare (black level when flare is generated) correction
function ON/OFF
To adjust the amount of flare correction for the R signal
To adjust the amount of flare correction for the G signal
To adjust the amount of flare correction for the B signal
To turn ON/OFF the DynaLatitude function (for automatically
setting the contrast between the bright and dark areas by detecting
the levels of the subject in these areas)
To turn ON/OFF the mode that uses the preset knee correction value
To turn the Auto Knee circuit ON/OFF
To adjust the gamma level
To adjust the level at which the knee correction starts. As the value
becomes larger, the start level decreases, which enhances the knee
correction effects.
To adjust the knee slope (amount of knee correction)
) in the table below are