Viewfinder Screen Adjustments - Sony CCU-TX50 Operating Instructions Manual

Viewfinder Screen Adjustments

The following adjustments are provided to improve the
visibility of the viewfinder screen.
Although these adjustment may make the viewfinder
image clearer, they have no effect on the output video
signal from the camera.
BRIGHT control
CONTRAST control
PEAKING control
Adjusting the eyepiece focus
Depending on the eyesight of the camera operator —
whether longsighted or shortsighted — the optimal
position of the viewfinder image varies. Adjust the
eyepiece focus to get the clearest viewfinder image for
your eyesight. First focus the image with the lens,
then adjust the eyepiece focusing knob. The
adjustment range is from –3 to 0 diopters
when shipped is 0 diopters).
Using an optional part allows you to modify the
adjustment range to –2 to +1 diopters or –0.5 to +3
diopters.
For details, consult your Sony dealer.
..........................................................................................................................................................................................................
1) Diopter: A unit to indicate the degree of convergence or
divergence of a bundle of rays.
Eyepiece focusing knob
OUTPUT/DCC
switch
1)
(default
Contrast and brightness adjustment
Carry out these adjustments with the color bars
displayed.
1
Set the OUTPUT/DCC switch to the BARS
position.
The color bars appear in the viewfinder.
2
Watching the color bars, turn the CONTRAST and
BRIGHT controls to adjust the contrast and
brightness.
3
Return the OUTPUT/DCC switch to its original
position.
Outline emphasis adjustment
Turning the PEAKING control changes the degree of
outline emphasis in the viewfinder image, to make
focusing easier.
Chapter 5 Adjustments and Settings
85