Dip Switch Settings; Shuttle Shot Function - Sony CCU-TX50 Operating Instructions Manual

Shuttle shot function

What is the shuttle shot function?
The shuttle shot function allows you to zoom at
maximum speed to a preset position (shuttle memory
position) simply by pressing the lens Shtl button.
When you release the Shtl button, the lens returns to
the original position.
Position before
operation
Hold Shtl button down.
Release Shtl button.
To set the shuttle memory position
1
Shuttle memory
position
3
2
Shtl
While pressing the Shtl button, rotate the shuttle
memory position knob 1 to set the zoom position.
Rotate the knob to the T side to move in the telephoto
direction, and rotate to the W side to move in the wide-
angle direction.
To zoom to the preset shuttle memory
position
Press the Shtl button and keep it held down. The lens
zooms to the preset position and stops.
When you release the Shtl button, the lens returns to
the position it was in before the operation.
Note
The motorized zoom lever does not function while the
Shtl button 2 is held down.

DIP switch settings

The DIP switches 3 on the VCL-920BY zoom lens
are used to make shuttle shot settings.
By DIP switch settings, the shuttle shot function can
be assigned to the VTR button and the RET button.
Purpose
Turn shuttle shot Turn on
function on or off
Turn off
Assign shuttle shot
Turn VTR control
function to VTR
function on
button
Turn shuttle shot
function on
Assign shuttle shot Turn return video
function to RET display function on
button
Turn shuttle shot
function on
DIP switch 4 is reserved. It is not used currently.
DIP switch setting
(number: position)
1: ON
1: OFF
3: OFF
3: ON
2: OFF
2: ON
47
Chapter 3 Shooting