Spf(Lead_Edge) - Sharp MX-M550U Service Manual

22-6
Purpose Adjustment/Setup/Operation data output/
Check (Display/Print)
Function (Purpose) Used to output the list of the setting and
adjustment data (simulations, FAX soft
switch, counters).
Section —
Operation/Procedure
When installing or servicing this machine, execute this simulation to
print and save various setting and adjustment data for next servic-
ing. (For example, memory trouble, PWB replacement, etc.)
1) Enter 1 with 10-key.
2) Press the [START] key.
The various setting and adjustment data are printed out. (The print
paper cannot be selected optionally.)
0 TRAY SELECT
1 PRINT START
SIMULATION 22-6
DATA PRINT MODE. SELECT SETTING, AND PRESS START.
0. TRAY SELECT :AUTO ONLY
1. PRINT START
22-7
Purpose Adjustment/Setup/Operation data output/
Check (Display/Print)
Function (Purpose) Used to display the key operator code.
(This simulation is used when the customer
forgets the key operator code.)
Section —
Operation/Procedure
The key operator code is displayed.
SIMULATION 22-7
KEY OPERATOR CODE DISPLAY.
CODE: *****
22-8
Purpose Adjustment/Setup/Operation data output/
Check (Display/Print)
Function (Purpose) Used to check the number of use of the fin-
isher, the SPF, and the scan (reading) unit.
Section Scanner (Image scanning) - Finisher
Operation/Procedure
The values of the finisher counter, the scanner (read), counter, and
the SPF related counters are displayed.
SPF Document feed quantity
SCAN Number of times of scan
STAPLER Number of times of staple
PUNCH Number of times of punch
STAMP Number of times of SPF finish stamp
SADDLE STAPLER Number of times of saddle staple
INSERTER Number of times of inserter
INSERTER OFF LINE Number of inserter off-line times
TRAY SELECT auto only
(Selection is not allowed.)
PRINT START
MX-M700N SIMULATION 7 – 20
SIMULATION 22-8
ORG./STAPLE COUNTER DATA DISPLAY.
SPF: ********
SCAN: ********
STAPLER: ********
STAMP: ********
INSERTER: ********
22-9
Purpose
Function (Purpose) Used to check the number of use (print
Section
Operation/Procedure
The values of the paper feed related counters are displayed.
TRAY1
TRAY2
TRAY3
TRAY4
BPT
1
ADU
LCC
SIMULATION 22-9
PAPER FEED COUNTER DATA DISPLAY.
TRAY1: ********
TRAY3: ********
BPT: ********
LCC: ********
22-10
Purpose
Function (Purpose) Used to check the system configuration
Section
Operation/Procedure
The system configuration is displayed. (The model names of the
installed devices and options are displayed.)
MACHINE
FINISHER
LCC
INSERTER
PUNCH
SYSTEM MEMORY
HDD
NIC
NSCN
PS3
FAX
FAX MEMORY
STAMP
PCU TYPE
I-FAX
PUNCH: ********
SADDLE STAPLER: ********
INSERTER OFF LINE: ********
Adjustment/Setup/Operation data output/
Check (Display/Print)
quantity) of each paper feed section.
Paper feed, ADU
Tray 1 use quantity
Tray 2 use quantity
Tray 3 use quantity
Tray 4 use quantity
Manual feed tray use quantity
Duplex paper feed quantity
Side LCC use quantity
TRAY2:********
TRAY4:********
ADU: ********
Adjustment/Setup/Operation data output/
Check (Display/Print)
(option, internal hardware).
—
(Model code)
NONE/ (Model code)
NONE/ (Model code)
NONE/ (Model code)
NONE/ (Model code)
Memory capacity (MB)
Hard disk capacity (MB)
NONE/ (Network Expansion kit)
NONE/ (Network scanner)
NONE/ (PS3 expansion kit)
NONE/ (Model code)
FAX expansion memory capacity (MB)
Finish stamp NONE/ (Model code)
PCU PWB type (JPN: Japan, EX: EX Japan)
None/ (Internet FAX expansion kit)